Those of you who have been following my adventures in stitch, will be aware of my deep seated desire to make loungewear I would happily answer the door in. And whilst I have no desire to be anything other than a 6 ‘o’ clock pyjama wearing semi-hermit, I’m keen to expand my choice of evening attire.
There have been some tentative forays with varying degrees of success:
- my first wearable toile of the Grainline Studio Linden Sweatshirt
- a his and hers single jersey pairing of the Ottobre Design New Boheme Jersey Tunic (Woman Autumn/Winter 5/2014) with another Linden
- and an attempt at sports luxe with a free sweatshirt pattern from Simply Sewing magazine.
It’s only when I booked on a couple of workshops with the queen of knits herself, that I felt the door to this secret club swing open for me. The Roewood from A Beginner’s Guide to Making Skirts and T-shirt from The Beginner’s Guide to Dressmaking are not my usual style of skin tight top and a-line shape silhouette. But I signed up regardless, as I was keen to glean any wisdoms I could from someone who held the key to my slouchwear aspirations. And I’m happy to say, with my knit game strengthened and both items in regular circulation, the investment more than paid off.
On reflection, one of my main stumbling blocks was treating knits in the same way as I do a wovens and by that I mean shoddily and with a distinct lack of respect. I live in a tiny one bedroomed flat and my living room is my every room. I’ve got by cutting denim and craft cottons on my carpeted floor but I’ve finally woken up to the fact I’m going to have to find an alternative surface for knits.
I’ve also grappled with curling edges in an attempt to find those elusive selvedges – spray starching and ironing them out of shape. I recently learnt that most knits are constructed in the round and that when cut and glued, the selvedges might not even be true. Finding the grain line is as easy as following a couple of ribs in the fabric and pinning them straight. And my enduring struggle to find the right side of the fabric has disappeared in the knowledge that the selvedge rolls to the wrong side and a cut edge rolls to the right.
With my new found confidence, I finally felt equipped to cut into this medium weight french terry I picked up from Dots n Stripes a few months ago. I was fortunate enough to meet the shop owner at a stitch show in Manchester and she kindly helped me choose a navy single jersey for the contrast sleeves and bands. Both materials are cotton in composition with an elastane content of 5 and 8% respectively.
For my first Linden I cut on a on 10 based on my waist and hip measurement and this was way too big, so I sized down to a 4 grading out to a 6 at the hip. This time I cut on a straight 4 and the only alteration to the pattern was to take 5cm off the length at the shorten/lengthen lines. And you know what, I can’t quite believe I’m writing this but it came together LIKE A DREAM. So much so that I’m now in an obsessive loop, contemplating which knit project I’m going to dive into next.
I cut the material out on a table, not the floor and I can’t emphasise enough how key this was to my success. I also used my now beloved walking foot and machine basted every seam before overlocking. I couldn’t bear to bring a knife anywhere near the neckline, so to finish this seam I used the mock overlock stretch stitch H on my Janome Sewist and – after seeking Wendy’s advice – top stitched around with a regular straight stitch. The result has surpassed all expectations and I now own half of the slouchwear outfit of my dreams. Coming up with the goods for the bottom half will be no easy challenge but I’m in this comfort seeking game for the long haul.